Register of Qualifications
Search Qualifications
| Qualification Code | Qualifications | Descriptor | Level | Authority Granting Agency |
Instrument (PSG/CMO/Board Resolution) |
Date of Authorization |
|---|---|---|---|---|---|---|
| ALTDRV204 | Driving NC II | The DRIVING NC II Qualification consists of competencies that a person must achieve to operate light motor vehicles classified under LTO Restriction code 1 and 2; transport passengers and loads over specified routes to local or district location and collect fare duly authorized by the relevant government agency; comply with local traffic rules and regulations and perform minor vehicle repairs and other minor servicing. | II | TESDA | TESDA Board Resolution No. 2004-20 | 12/9/2004 - Present |
| ALTFRG209 | Forging NC II | The FORGING NC II Qualification consists of competencies that a person must achieve to be able to perform hand and hammer forging of low to medium carbon and alloy up to steel carbon and alloy steels using a variety of techniques, tools, formers and heating devices. It also include basic incidental heat/quenching, tempering and annealing of ferrous and non-ferrous metals of various types and thicknesses. | II | TESDA | TESDA Board Resolution No. 2009-06 | 3/16/2009 - Present |
| ALTFME207 | Foundry Melting/Casting NC II | The FOUNDRY MELTING/CASTING NC II Qualification consists of competencies that a person must achieve to be able to melt different kinds of metals, cast it and clean. | II | TESDA | TESDA Board Resolution No. 2008-36 | 12/18/2008 - Present |
| ALTFMO207 | Foundry Molding NC II | The FOUNDRY MOLDING NC II Qualification consists of competencies that a person must achieve to be able to produce all types of molds and cores using different kinds of binders and sand. He may produce the molds or cores manually or he may use molding machines and core making machines. | II | TESDA | TESDA Board Resolution No. 2007-42 | 11/22/2007 - Present |
| ALTFPM207 | Foundry Pattern Making NC II | The FOUNDRY – PATTERN MAKING NC II Qualification consists of competencies that a person must achieve to be able to manufacture all types of solid, split and turned patterns and pattern component parts, including but is not limited to general engineering patterns, master patterns with multiple contraction, skeleton, frame and strickle, wheels, pulleys, chain sheaves, impellors, etc. | II | TESDA | TESDA Board Resolution No. 2007-42 | 11/22/2007 - Present |
| ALTHET208 | Heat Treatment NC II | The HEAT TREATMENT NC II Qualification consists of competencies that a person must achieve to be able to select the appropriate process of heat treatment to achieve the desired result, recording and maintaining the heat treatment information in the manufacture of many other metals. | II | TESDA | TESDA Board Resolution No. 2008-36 | 12/18/2008 - Present |
| ALTLMC208 | Laboratory and Metrology/Calibration NC II | The LABORATORY AND METROLOGY/CALIBRATION SERVICES NC II Qualification consists of competencies that a person must achieve to perform laboratory and metrology/calibration services work. With the increasing demand for accuracy and reliability of dimensional measurement, laboratory and metrology/calibration services has become very important. | II | TESDA | TESDA Board Resolution No. 2008-03 | 4/11/2008 - Present |
| ALTMST209 | Metal Stamping NC II | The METAL STAMPING NC II Qualification consists of competencies that a person must achieve to set up, conduct trial run and operate mechanical press; perform mechanical shearing operation which applies to a range of press operations including blanking, cutting-off, piercing/punching, trimming and bending; and perform mechanical press forming operation which applies to a range of press forming operations including piercing/punching, trimming, and forming/drawing. | II | TESDA | TESDA Board Resolution No. 2009-06 | 3/16/2009 - Present |
| ALTMMK209 | Moldmaking NC II | The MOLDMAKING NC II Qualification consists of competencies that a person must achieve to be able to machine parts using a variety of machining equipment and tools on plain carbon steel, heat resistant steel and other metals and alloy using different machining processes; perform precision assembly and testing complex engineering components and mechanical assemblies in a production, manufacturing environment. | II | TESDA | TESDA Board Resolution No. 2009-06 | 3/16/2009 - Present |
| ALTMSE215 | Motorcycle/Small Engine Servicing NC II | The MOTORCYCLE/SMALL ENGINE SERVICING NC II Qualification consists of competencies that a person must achieve to install and service parts of motorcycle/small engine and to perform periodic maintenance. | II | TESDA | TESDA Board Resolution No. 2015-20 | 12/16/2015 - Present |
| ALTPMO208 | Painting Machine Operation NC II | The PAINTING MACHINE OPERATION NC II Qualification consists of competencies that a person must achieve to perform pre-treatment and cathodic electro-deposition process operations; perform gray primer (2nd primer) application procedures; and perform top coat application procedures in accordance with manufacturer’s specification. | II | TESDA | TESDA Board Resolution No. 2008-03 | 4/11/2008 - Present |
| ALTPMO208 | Plastic Machine Operation NC II | The PLASTIC MACHINE OPERATION NC II Qualification consists of competencies that a person must achieve to prepare molds for composites production, prepare materials for formulae, assemble materials and equipment for production, operate injection molding equipment and blow molding equipment, It also include competency to monitor process operations and to finish products and components | II | TESDA | TESDA Board Resolution No. 2008-36 | 12/18/2008 - Present |
| ALTPRI208 | Process Inspection NC II | The PROCESS INSPECTION NC II Qualification consists of competencies that a person must achieve to perform standard quality inspection of processes in different manufacturing processes in the assembly, foundry, metal and plastic sectors. | II | TESDA | TESDA Board Resolution No. 2009-06 | 3/16/2009 - Present |
| ALTTAM208 | Tinsmithing (Automotive Manufacturing) NC II | The TINSMITHING (AUTOMOTIVE MANUFACTURING) NC II Qualification consists of competencies that a person must achieve to perform tinsmith operation in an automotive manufacturing work area. | II | TESDA | TESDA Board Resolution No. 2008-03 | 4/11/2008 - Present |
| ALTABP306 | Automotive Body Painting/Finishing NC III | The AUTOMOTIVE BODY PAINTING/FINISHING NC III Qualification consists of competencies that a person must achieve to repair pearl/mica metallic body panels specifically applying the skill in pearl/mica, metallic color matching. | III | TESDA | TESDA Board Resolution No. 2006-22 | 10/26/2006 - Present |
Page 4 of 101
